Tunze 7097 - Advanced Current Flow Modes; Wavebox and Storm Simulations; Feeding and Nighttime Operation; Moon-Phase Simulation

92 93
(6) Oscillating current with Turbelle
®
pumps (Wavecontroller)
The pump channels 3 and 4 can be used as Wavecontrollers for the operation of Turbelle
®
propeller pumps
(nanostream
®
, stream, masterstream). This function includes an automatic search of the resonance frequency, which
can be combined with a wave motion or high and low tide simulation.
(7) Food timer
The pumps can be stopped completely by pushing a button on the Multicontroller 7097 during the feeding. After about
1 to 15 minutes (adjustable), a restart is carried out automatically.
(8) Moon-phase simulation (moonlight)
The Multicontroller 7097 offers a 29-day moon simulation function for the TUNZE
®
LED. The moonlight with photo
diode 7097.050 (optional) can also be connected to each channel of the Multicontroller to reproduce the lunar cycle.
(9) Night mode
The Multicontroller 7097 offers a time-adjustable night mode which throttles down the pumps at night, to enable small
animals and plankton to rise up in the aquarium just as they would any reef, and occupy the habitat of diurnal animals.
(10) Storm for desedimentation (storm cycle)
Like in nature, sediment should be removed from a reef aquarium in regular intervals. This function can be programmed
automated with the Multicontroller 7097, in order to control the connected pumps according to an efcient and precise
cycle.