Tunze 7097 - TUNZE LED Lighting - Moonlight; Moonlight Phase Simulation

120 121
“
moonlight channel 1“ (oder 2, 3, 4) – moon-phase simulation
In the
“moonlight“ eld (1) the option “one moonlight LED only“ (2) - only one LED active in the LED-lamp - or
“moonlight with all TUNZE
®
LED“ (3) - all LEDs in the LED lamp active - can be clicked for each light channel.
Thus, all TUNZE
®
LED on the Multicontroller 7097 can be used as moonlight. The Multicontroller 7097 offers a real
automatic moon phase functionality, from full moon to new moon, with the internal real time clock aligned to the
natural moon-phase.
For the option
“moonlight with all TUNZE
®
LED“, the exact light color (4) should also be selected.
The start of the moonlight will commence as of the last time setting in the “channel” eld, and stop at the rst time
setting.
The cycle of the moon-phase is also precisely displayed in the “moonlight“ eld in % (5).
1
2
3
4