EasyManua.ls Logo

Tunze Comline DOC Skimmer 9001 - User Manual

Tunze Comline DOC Skimmer 9001
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
x9001.8888
08/2014
DOC Skimmer 9001
Foamer 9001.040
Gebrauchsanleitung
Instructions for Use
Mode demploi
Comline
®
Question and Answer IconNeed help?

Do you have a question about the Tunze Comline DOC Skimmer 9001 and is the answer not in the manual?

Summary

Comline DOC Skimmer 9001 General

Safety Instructions

Outdoor Operation Prohibition

The device is not designed for outdoor use.

Electrical Safety Precautions

Ensure correct voltage and use RCD. Keep plugs higher than the unit.

Water Temperature Limit

Maximum aquarium water temperature is +35°C.

User Suitability and Child Safety

Supervise users with limitations and keep children from playing with the device.

Magnet Holder Safety Instructions

Strong Magnet Warning

Handle with care, keep away from children, danger of injury.

Handling Magnets Safely

Avoid direct contact, keep away from metal/magnets, use side surfaces.

Magnetic Sensitivity Precautions

Keep 30cm away from pacemakers, data carriers, credit cards.

Transport and Heat Sensitivity

Use supplied spacer, avoid heat over 50°C to prevent damage.

Attachment

Magnet Holder Capacity

Holds glass up to 10mm; full force in water.

Elastic Buffer Installation

Attach self-adhesive buffers to magnet holder parts for secure grip.

Accessories

Magnet Extension 6025.501

Enhances holding force for glass up to 15mm.

Water Intake

Contact Foam Skimming

Partially closed circuit, protein supply via diffusion, avoids plankton suction.

Standard Skimming

Intake approx. 100mm below surface, suitable for all aquariums.

Surface Suction with Surface Kit 9001.500

Adjusting Water Inlet for Surface Suction

Rotate water inlet 90° for side surface skimming.

Installing Surface Kit

Remove strainer, click Surface Kit into pump inlet, position vertically.

Position Selection and Installation

Skimmer Placement Guidelines

Place in a corner for easy access and cup removal.

Water Level and Outlet Configuration

Align water level with mark, omit outlet in certain filters.

Installation in Aquariums with Covers

Using Spacer for Aquarium Covers

Mount spacer between skimmer and magnet for 15mm spacing.

Magnet Holder and Spacer Assembly

Remove holder, clip spacer, clip holder onto spacer, mount skimmer.

Commissioning

Initial Skimmer Setup

Mount firmly, ensure correct water level, avoid direct flow.

Foamer Operation and Air Adjustment

Connect power, open air screw, adjust for foam consistency.

Break-in Period and Bubble Formation

Initial Pump Noise Reduction

Pump noises reduce after 1-2 weeks break-in.

Bubble Formation at Output

Fine bubbles during start-up or feeding are normal, usually disappear.

Weekly Maintenance

Skimmer Cup Emptying and Cleaning

Disconnect Foamer, lift cup, empty, clean with water and brush.

Post-Maintenance Performance

Reinsert cup, switch on Foamer for immediate performance.

Annual Maintenance and Disassembly

Complete System Maintenance

Perform full system maintenance at least annually; shorten intervals if needed.

Disassembly Procedure

Remove skimmer cup, top plate, outlet, Foamer, and air hose.

Foamer Maintenance

Service the Foamer separately, clean air path and housing.

Reassembly

Reassemble components in reverse order, ensure air hose is not kinked.

Parts List

Comline Foamer 9001.040 General Information

Product Description and Benefits

Air generator for protein skimmers, energy saving, reliable, low maintenance.

User Suitability and Child Safety

For users with limitations; supervise children.

Technical Data

Mains connection, cable length, air capacity, power consumption.

Foamer Safety Instructions

Operation Without Water Prohibition

Do not operate pump without water.

Cable and Location Restrictions

Use 2m cable indoors; 10m rubber cable for outdoors. Not for pools.

Electrical Safety and Water Damage Prevention

Check voltage, use RCD, keep plugs higher than unit.

Water Temperature Limit

Maximum aquarium water temperature is +35°C.

Foamer Maintenance and Disassembly

Regular Cleaning of Foamer and Drive Unit

Clean Foamer and drive unit at least annually; shorter intervals for difficult conditions.

Pump Cover and Drive Removal

Remove pump cover, drive unit, and motor cover; rinse pump chamber.

Cleaning Stubborn Deposits

Soak in diluted acid if unit is stiff; rinse thoroughly.

Foamer Parts List

Warranty Information

Limited Warranty Period

24 months from purchase date for material/workmanship defects.

Remedies and Exclusions

Return for repair/replacement; excludes consequential/other damage.

Warranty Exclusions

Excludes damage from improper handling, modifications, or non-recommended connections.

Disposal Instructions

Tunze Comline DOC Skimmer 9001 Specifications

General IconGeneral
TypeProtein Skimmer
BrandTunze
ModelComline DOC Skimmer 9001
Water throughput600 liters/hour (158 gallons/hour)
Air Intake150 l/h (40 USgal./h)
Skimmer cup volume0.2 L
Immersion depth200 - 250 mm (7.9 - 9.8 inches)