Need help?Do you have a question about the Turbines ATJ SV Series and is the answer not in the manual?
Read these instructions carefully before first operations for turbine engine.
Information regarding copyright, usage rights, and liability for ATJ Turbines.
Details on warranty duration for engine core and electronic parts, and coverage limitations.
Conditions that will void the ATJ Turbine engine warranty, such as unauthorized maintenance.
Crucial safety precautions for operating the turbine engine, including fire safety and personal protection.
Specific warnings about high speeds and installation procedures for turbine-powered RC models.
Checklist of essential items and conditions before starting the turbine engine.
Procedures and checks to perform after the turbine engine has been shut down.
Guidelines for engine mounting, fuel tank placement, and air ducting.
Details on connecting the turbine engine core, fuel pump, and ECU.
Instructions for connecting the fuel pump, filter, and cut-off valve.
Connection details for turbine signal cables and power cables to the engine.
Connecting the ECU's signal cables for gas valve and thermocouple.
Connecting the throttle signal and GSU/System Analyzer to the ECU.
Connecting engine power cables and main power/pump cables to the ECU.
Accessing startup parameters and information/test menus via the ECU.
Calibrating the radio control transmitter throws for engine control.
Step-by-step guide for the initial startup sequence of the turbine engine.
Using the data terminal to program and configure the ECU for engine operation.
Details on selecting and adjusting throttle response curves for optimal control.
Using test menus to verify starter, glow plug, pump, and solenoid valve functions.
Adjusting operational parameters for the engine during normal running.
Recommended air trap tanks and fuel/oil mixture for ATJ turbine engines.
Procedure for priming the fuel pump and fuel lines using the ECU's test selection.
Specifications for the main battery and by-pass nozzle extension.
Essential maintenance points for faultless engine operation, including cleaning and intervals.
List of possible messages displayed on the data terminal and their meanings.
Explanation of warning messages related to RC signal, pump limits, and engine status.
To Next Page
General