8 iNSPIRE iP3000 Quick Start Guide 9
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information about this or any other TURBOSOUND product,
please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.
Please retain all packaging in case of futurere-shipment.
For iP3000, covers and shoulder bags are available separately.
Assembly
iP3000 speakers ship with separate base and column elements that will need to be assembled.
To assemble the speakers, follow these steps:
1. Make sure the unit is switched o .
2. Place the base unit onto a rm, level surface, with the column connection inputs facing upward.
3. Align the speaker column over the base unit’s connection inputs with the column connectors facingdownward.
4. Lower the speaker column into the connection input and
gently press downward until the column connectors slot into place.
Note: iP3000 features a 2-piece column assembly. Connect the lower column assembly to the base unit rst, and then connect the upper column segment directly on
top of the lower segment.
Once the column assembly is rmly slotted into place, the iP speakers will automatically make all powerand audio connections between the base unit and the
speaker column.
1. ឱ឵ᤉឮǎ
2. ឱݱؔεߜᤉឮǎ
3. ឱญధᄋᇩǎ
4. ឱᥗ߷ధᄋឮǎ
5. ឱӉڛ᭦ᤄබᄋڢஶΏၺశַǎ
6. ឱၺࣱ࣌ຎพశַǎ
7. ឱӉ܅܌ᤱ᮴Աǎ߸ᜊశַឱᥗ
8. ឱӉ࠳శַ߸ᜊڛམ຺ᬅᤄ
9. ឱӉሩᬕমତ݁ڢତ݁ᄋ߸М
10. ݱؔεઑႄ຺ጴΏЦˁᜃᢇ҉
11. ឱԷΏၺԉࠓࠁᄋᬅܭ֘
12. ឱԷΏၺԉࠓ
13. ᥆ႄᭈᲟఱˁΏၺశܭ
14. ధ፦οڪᮍႁՍಬᄋ፦οցᤊ
15. శܭᤍႄ຺ʸࠁధڢ
16. ᔫႄ຺ତ݁٩Ч
17. శַᤡၺ๓
MUSIC Group IP Ltd.ОՄᄋಗญгಗǎ
© MUSIC Group IP Ltd. 2017ྡీధǎ