Turbosound iNSPIRE iP82 Service Support

985-40000-00697 Rev.A
2016-09-16
page 1 of 2
Con dential, for internal use only. Not to be reproduced.
Service Support
TURBOSOUND iNSPIRE and iX factory reset procedure.
Applicable products:
• iP2000, iP1000, iP500, iP15B, iP12B
• iX15, iX12
Use this procedure if a customer is locked out of the speaker DSP due to forgetting the password.
1. Press and hold down the encoder knob and the SETUP button while powering on the unit.
2. The display screen should now be  ashing white and blue.
3. Press the encoder knob twice.
4. You should now see the following screen:
5. Click the 4 buttons:
PROCESS -> SETUP -> EXIT -> ENTER
TURBOSOUND
iNSPIRE and iX Reset

Turbosound iNSPIRE iP82 Specifications

General

Frequency Response	50 Hz - 20 kHz
Max SPL	126 dB
LF Driver Size	8"
Outputs	1 x XLR
Coverage (H x V)	90° x 60°
Enclosure Material	Polypropylene
Bluetooth	Yes
DSP	Yes
Type	Powered Loudspeaker
Connectivity	Bluetooth
Inputs	2 x XLR/TRS combo
Power Output	1000W (500W LF, 500W HF)