Need help?Do you have a question about the Turbosound QLight TQ-310 and is the answer not in the manual?
General| Configuration | 2-way |
|---|---|
| Impedance | 8 Ohms |
| Dispersion | 90° x 60° |
| Enclosure Material | 15 mm Birch Plywood |
| Power Handling | 300W RMS, 1200W peak |
| LF Driver | 10" (254 mm) |
| HF Driver | 1" (25 mm) compression driver |
| Connectors | 2 x Neutrik Speakon NL4 |
| Dimensions (H x W x D) | 320 mm |
| MF Driver | Not applicable |
Details the TQ-310, a trapezoidal passive loudspeaker for sound reinforcement and monitor use.
Describes the TQ-315, a switchable bi-amped/passive loudspeaker for sound reinforcement applications.
Specifies that amplifier RMS power should match loudspeaker program power for optimal performance and headroom.
Step-by-step procedure for removing the LF driver from the TQ-315 cabinet.
Step-by-step procedure for removing the HF unit from the TQ-315 cabinet.
To Next Page