Why is steam leaking from the lid of my TurboTronic Electric Pressure Cooker?
If steam is leaking from the lid of your TurboTronic Electric Pressure Cooker, several factors could be at play. First, ensure that the Big Seal Ring (17) is correctly installed. If it's uninstalled, install it. Also, the Big Seal Ring (17) might be dirty, preventing proper seating; in this case, clean it. Finally, make sure the lid is properly locked.
What to do if it's difficult to open the lid of my TurboTronic Electric Pressure Cooker?
If you're finding it hard to open the lid of your TurboTronic Electric Pressure Cooker, it's likely that there's still pressure inside. Use the Quick Release method to release any remaining pressure. Before trying to open the lid again, make sure the Float Valve (3) is in the low position.
Why is steam leaking from the float valve on my TurboTronic TurboChef Pot?
If steam is leaking from the float valve of your TurboTronic Electric Pressure Cooker, the Seal Ring of the Float Valve (15) is likely dirty. Clean the Seal Ring of the Float Valve (15), which is located around the Float Valve on the underside of the Lid.
General| Material | Stainless steel inner pot |
|---|---|
| Power | 1000W |
| Functions | Pressure Cooker, Slow Cooker, Rice Cooker, Steamer, Yogurt Maker |
| Display | LED digital display |
| Safety Features | Overheat protection |
To Next Page