turck TBEN-S2-2RFID-4DXP Technical Support Document

V03.00 | 2019/10
11
 Open the Turck Service Tool.
 Click Actions or press [F4].
 Click Set HF RFID reader bus address.
Fig.4: Selecting a function — Set HF RFID reader bus address
The HF RFID Reader Setup Tool window opens.
 Select the COM port to which the interface converter is connected.
 Click Read.
a The discovered read/write head is displayed in the Status message field.
Fig.5: Window — HF RFID Reader Setup Tool

turck TBEN-S2-2RFID-4DXP Specifications

General

Brand	turck
Model	TBEN-S2-2RFID-4DXP
Category	Recording Equipment
Language	English