10
To maintain reliability and avoid fire, the wire harness and ECM must be installed
properly. It is absolutely critical that the engine and chassis be connected to a common
ground that ultimately terminates at the NEGATIVE battery post. Be careful to avoid
running wires where they may be pinched or insulation compromised; ensure wires do
not come in contact with exhaust or high heat. Ensure engine chassis and battery is
properly grounded before connecting wire harness/ECM. To avoid causing damage
always disconnect the negative battery lead before removing the ECM.
Sensors
In some cases it may be necessary for us to install sensors that may be different
than those installed by the OEM.
If replacement is necessary we recommend you contact Turnkey Engine Supply to
ensure proper replacements of sensors are used.
Maintenance – See last page
Proper maintenance is required to ensure proper operation and longevity from this
engine. We advise you to follow the recommended maintaience intervals found on the
last page of this document.
We carry a large inventory of replacements and performance parts; we
recommend you contact Turnkey Engine Supply before installing any replacement or
performance parts.
!!!ENGINE WARRANTY!!!
This engine is intended for off road/racing applications. The OEM provides NO
warranty coverage for engines used in theses applications. Due to the heavy duty use we
provide a limited warranty for the break in period or 90 days, which ever comes first.
This warranty covers defects in materials and workmanship only. It does not cover
installation or user related problems. If you believe you have a failure that is covered
under this warranty, we recommend you contact the installer/point of purchase 1
st
as the
majority of problems are easily resolved. Please have the installer/point of purchase
contact Turnkey Engine Supply to verify coverage. We Do NOT accept engines, parts,
or complete cars at our business without prior confirmation.
To Next Page
Loading...
General