1. For a more ergonomic position, fold out the stands
on the base of the keyboard.
2. Plug USB Type-C connector to the Keyboard.
3. Plug USB type-A connector into any free USB port.
4. Start your computer and connect to the internet.
5. Navigate to www.turtlebeach.com/swarm2
and download the latest driver.
6. Start the software installation process and follow the on-screen.
INSTRUCTIONS
EN
1. Pour une position plus ergonomique, dépliez les pieds
à la base du clavier
2. Branchez le connecteur USB-C au clavier.
3. Branchez le connecteur USB-A à n’importe quel port USB libre.
4. Démarrez votre ordinateur et connectez-vous à internet.
5. Allez sur www.turtlebeach.com/swarm2 et téléchargez
le dernier pilote.
6. Lancez l’installation du logiciel et suivez les instructions à l’écran.
INSTRUCTIONS
FR
ANLEITUNG
DE
1. Um eine ergonomischere Position einzunehmen,
klappe die Ständer an der Unterseite der Tastatur aus.
2. Verbinde den USB-Typ-C-Stecker mit der Tastatur
3. Verbinde den USB-Typ-A-Stecker mit einem freien USB-Anschluss.
4. Schalte deinen Computer ein und verbinde ihn mit dem Internet.
5. Navigiere zu www.turtlebeach.com/swarm2
und lade den neuesten Treiber herunter.
6. Starte den Software-Installationsvorgang und folge den
Anweisungen auf dem Bildschirm
INSTRUCCIONES
ES
1. Para adoptar una posición más ergonómica, dobla
los soportes de la base del teclado.
2. Conecta la clavija USB tipo C al teclado.
3. Conecta la clavija USB tipo A a cualquier puerto USB libre.
4. Inicia tu ordenador y conéctate a Internet.
5. Entra en www.turtlebeach.com/swarm2
y descarga los drivers más recientes.
6. Comienza el proceso de instalación del software
y sigue las instrucciones en pantalla.
1. 보다 인체공학적인 위치에 놓으려면 키보드 베이스의 받침대를 접으세요.
2. USB C타입을 키보드에 연결하세요
3. USB A타입 커넥터를 비어 있는 USB 포트에 연결하세요.
4. 컴퓨터를 부팅하고 인터넷에 연결하세요.
5. www.turtlebeach.com/swarm2 로 이동해 최신 버전의 드라이버를
다운로드하세요.
6. 소프트웨어 설치 프로세스를 시작하고 화면의 지침을 따르세요
지시사항지시사항
KO
使用説明
JP
1. キーボードの底面にあるスタンドを折りたたむと、よりエルゴノミック
なポジションになります。
2. USB Type C コネクタ でキーボードと接 続
3. USB タイプ A コネクタを空いている USB 端 子 に 差し込 みます。
4. コンピューターを起動して、インターネットに接 続します。
5. www.turtlebeach.com/swarm2 にアクセスし、最新のドライバーを
ダウンロ ードします。
6. ソフトウェアのインストールを開 始し、画面の指 示に従います。
Regulatory Compliance Statements for KAAB0007
Federal Communications Commission (FCC) Compliance Notices
Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operationCaution: Any changes or modifications
not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you
can drop o your waste for recycling, please contact your local authority, or where you purchased your product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regula-
tions 2007. To fulfill our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging
waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the-recycling-room/
For instructions in other languages, please visit www.turtlebeach.com/homologation
To Next Page
Loading...