Need help?Do you have a question about the Tusa PLATINA R-100 and is the answer not in the manual?
Manual for authorized service technicians; assumes mechanical ability and diving experience. Not for general distribution.
Approved lubricants and sealants for regulator maintenance, including specific types like silicone grease and perfluoropolyether grease.
Introduces key terms for communication and explains the regulator's primary function of reducing high pressure air.
Details the internal mechanism of the balanced piston first stage and how it regulates intermediate pressure.
Step-by-step instructions for rinsing, drying, and storing the regulator after diving to prevent corrosion and damage.
Guidelines for determining regulator service intervals based on breathing cycles, diving hours, and equipment usage.
Factors influencing service recommendations, including diving environment, user maintenance, experience, and planned future use.
Outlines methods for inspecting the regulator's exterior and internal components for wear, damage, or contamination.
Guidance on inspecting O-rings and sealing surfaces for damage, stressing factory parts and proper handling.
Details inspecting rubber components for deterioration or damage from age, misuse, or cleaning agents.
Essential steps before troubleshooting, including customer consultation, problem duplication, and recording findings for specific issues.
Comprehensive guide covering disassembly, cleaning, repair schedule, and reassembly of the regulator components.
Recommends mild cleaning solutions for components and provides specific warnings against using certain chemicals or liquids.
Details the recommended schedule for replacing soft seals and components based on service use, cycle life, and time intervals.
Guides technicians through the process of tuning the regulator to achieve the correct intermediate pressure range.
Lists precise torque values for various components during assembly and tuning to ensure correct and safe operation.
Lists weight, working pressure range, and intermediate pressure specifications for the R-100 balanced piston first stage.
Explains how to adjust the intermediate pressure for optimal performance across different supply pressures for the regulator.
Warns against using the regulator in water temperatures below 40 degrees F (4.5 degrees C) due to potential freezing issues.
States the R-100 is not designed for contaminated water diving, lacking features like positive pressure inside the case.
General| Brand | Tusa |
|---|---|
| Model | PLATINA R-100 |
| Category | Controller |
| Language | English |
To Next Page
