Drop-in mount Sinks Installation Instructions
Stainless Steel
These instructions are for installing a Drop-in sink, which is installed from above and
sealed to the top of the counter.
BEFORE INSTALLING THE SINK, INSPECT IT FOR DAMAGE. DO NOT
INSTALL A DAMAGED UNIT.
CAUTION: Risk of personal injury. Metal surfaces can be sharp and can cause severe cuts.
Please use gloves and handle the sink with care.
Remember, it is your responsibility to follow all local plumbing and building codes.
The warranty will be voided if these installation instructions are not followed.
RECOMMENDED TOOLS
3/8" Drill with 3/8" Drill Bit
Long Shank Flat Screwdriver
Plumber's Putty
Pencil
Silicone Caulk and Caulk Gun
Saber Saw
Flashlight
Teflon Tape
Safety Glasses
Gloves
Adjustable Wrench
For safety and ease of installation, the manufacturer recommends the use of the helpful tools above.
Works with sink kits 672-4150, 672-4153, 672-4154, 672-4155, 675-4156, 672-4157,
672-4321, 672-4322, 672-4324
To Next Page
Need help?
General