TV Star T9 HD LCD - User Manual

Questions and Answers

C
Christina PachecoAug 2, 2025
Why is there no picture on my TV Star T9 HD LCD?
- S
  stewartmarissaAug 2, 2025
  If there is no picture on your TV Star TV, it could be due to the power not being connected. Make sure to connect the power. Alternatively, the power switch might not be turned on, so switch on the power.
J
Jessica CookAug 8, 2025
What to do if the Remote Control is not responding to my TV Star T9 HD LCD TV?
- L
  Leslie RivasAug 8, 2025
  If the remote control isn't responding to your TV Star TV, the battery might be exhausted. Try changing the battery. It's also possible that the remote control is not facing or close enough to the unit, so adjust the position of the remote control and move closer to the unit.
T
Tina PowellAug 13, 2025
What to do if my TV Star TV screen shows ‘No Signal’?
- N
  Nancy HernandezAug 13, 2025
  If your TV Star TV screen displays ‘No Signal’, it might be because the DVB-T cable is not connected. Ensure you plug in the DVB-T cable. Another possibility is that the aerial cable is faulty, so check the aerial cable and its connections.
C
crystalbennettAug 20, 2025
Why is the picture breaking up on my TV Star T9 HD LCD TV?
- R
  rowlandandrewAug 20, 2025
  If the picture on your TV Star TV is breaking up, the signal might be too weak. Check the aerial cable and connections to resolve this issue.
V
Victoria RojasAug 26, 2025
How to fix no sound from speaker on TV Star TV?
- M
  Melissa MorrisAug 26, 2025
  If there is no sound from the speaker of your TV Star TV, it could be due to no or an incorrect connection with the audio cable. Connect the audio cable correctly. Alternatively, the program might be a radio program; in this case, press the key to shift into TV mode.