EasyManua.ls Logo

TVS Apache RTR 200 4V - Page 34

TVS Apache RTR 200 4V
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
21
REAR BRAKE PEDAL
The rear brake pedal operates a hydraulic circuit (ABS
circuit incase of Dual channel ABS) that operates
the rear brake system and it is located adjacent to
the right side foot rest. To control the speed of your
vehicle close the throttle completely, and gradually
press the brake pedal down wards.
Rear brake pedal position can be set to your convenience.
Contact your TVS Motor Company Authorised Main
Dealer / Authorised Dealer for setting the brake pedal
position.
Note
Independent use of rear or front brake reduces the
overall braking efficiency. In extreme conditions braking
with only rear or front brake may lock the wheel which
would result in skidding or toppling of vehicle.
Braking performance is affected adversely with wet
surfaces, loose surfaces and overheating of brake system
due to unnecessary continuous application of brakes.
For safety, exercise extreme caution while braking and
also at turning. Do not accelerate while turning.
Caution

Related product manuals