53
53
SEAT
The seat lock is located between the rider and the
passenger seat assembly.
Rear seat (passenger seat)
To remove the rear seat (1), insert the ignition key
into the seat lock (2). Turn it clockwise, pull & release
the front section of the seat first, followed by the rear
section as shown in the above figure. To install the
rear seat, reverse the removal procedure.
Make sure that the seat is locked securely in position.
1
2
Do not sit on the vehicle when it is parked on the side
stand / centre stand, as your full weight would rest on
the vehicle’s only support.
Caution
Park the motorcycle safely on a solid ground. On slopes,
engage the first gear and park the vehicle in such a way
that the front wheel faces uphill.
Always release the side stand to its full up position
before moving the vehicle.
To Next Page
Loading...
