19
19
MODE SWITCH
‘Mode’ switch is provided to change the mode
between ‘ODO’, ‘TRIP A’, ‘TRIP B’, ‘TRIP F’*,
‘ECO %’ and ‘CLOCK’.
Sequence of Mode switch are as follows:
1. ODO 2. Trip A 3. Trip B
4. Trip F* 5. ECO % 6. Clock
Resetting Trip A and B
Press the ‘Mode’ switch once or twice to change
the display to ‘TRIP A’ or ‘TRIP B’ mode which needs
to be reset. Now press the ‘Mode’ switch again for
5 seconds to reset the respective trip data.
Resetting economy drive indication
In ‘Eco drive %’ mode press the ‘Mode’ switch for
5 seconds to reset ‘Eco drive %’ data to 0.0.
Digital clock setting
• Change the meter to ‘CLOCK SETTING MODE’
mode by long pressing ‘Mode’ switch when the
display is in ‘ODO’ mode.
• Press the ‘Mode’ switch till the hour digits of the
clock starts blinking.
* ‘TRIP F’ can be accessed incase of low fuel only.
• Once the hour digits started blinking, short press
the ‘Mode’ switch again to increase the hours.
• Press the ‘Mode’ switch till the minute digits of
the clock starts blinking.
• Once the minute digits started blinking, short
press the ‘Mode’ switch again to increase the
minutes.
• Long press of the ‘Mode’ switch again to exit the
clock setting.
• Press the ‘Mode’ switch till the AM/PM digit
starts blinking.
• Once the ‘AM/PM’ digit started blinking, short
press the ‘Mode’ switch again to swap between
‘AM’ and ’PM’. Long press the ‘Mode’ switch
again to exit the clock setting.
To Next Page
Loading...
