● Refit drain plug along with plain washer and tighten it.
● Remove the dip stick and pour the correct quantity of
recommended oil by using special tool.
● Insert and tighten the dip stick completely.
● Check the oil level.
● Replace engine oil at every 10000 kms.
Tool name Tool size
Ring spanner 10 mm
Engine Oil Replacement
B
Self maintenance procedure
045
Engine Oil Replacement
● Run the Engine for a few minutes to warm up the oil
● Park the vehicle on level ground
● Allow some time for the oil to settle down.
● Place a oil pan under the drain plug and un-screw hex.
flange nuts (2nos.) and take out the cover oil strainer(B).
Also Remove 17 mm Magnetic drain bolt provided on the
crank case LH, and clean.
To Next Page
Loading...
