page 9
Now you can easily add up to 6 boxes underneath eachother. Therefore you need the
BLT24. Pull up the Box you have already rigged up to the height where you can set one
more Box underneath it. Then connect the next Box BBT to BBT and use the Boxlinks
(BLT24) to angle them.
The angling is done by the holes of the BLT24s. Every left out hole gives you 6° of angle.
This picture shows you an angle of 12°
inbetween the speakers. The overall angling
is done by the choice of the pinpoint in the
BCT24. The simulation can be done in EASE
FOCUS.
PLEASE CHECK ALL CONNECTIONS AFTER
MOUNTING THE RIGGING ELEMENTS
!
To Next Page
Loading...
