Do not stamp on Modules or put weight on Modules.
Do not disassemble or drop Modules. Do not remove any nameplate or component of the module.
Do not use mirrors or magnifiers to concentrate sunlight onto Modules.
Do not lift the module by grasping the junction box or cable wire.
Do not use any sharp object with Modules.
Do not directly apply pressure on the glass surface or backsheet of Modules.
Do not touch the surface of the coated glass with bare hands.
Ensure all contacts and the operating environment are clean and dry.
Module Carry and Installation Instruction
Both hands when
handling Modules
Ensure Modules are fixed
properly
Do not use sharp objects
with Modules
Do not pull the wiring
cables or junction box
Do not touch Modules with
bare or dirty hands
Do not pile up Modules on
uneven ground
Do not drop or throw
Modules
To Next Page
Loading...