TW KN321 - TX Mode

To Previous Page

TX Mode:

Page 05

TX mode will automatically search for other Bluetooth receiving devices

(such as Bluetooth headset, Bluetooth speaker, Bluetooth receiver, etc.), The

red-light ashes twice a second during the pairing process, and the red-

light ashes once every three seconds after the pairing is successful.

HOW TO USE:

. 1 Plug one end of the audio cable into the audio output of the devices

and the other end into the audio of the KN321.

. 2 Conrm that it is in TX mode (red light ash). The KN321 will

automatically search for Bluetooth headset or Bluetooth speaker

pairing.