Twin-Star International M3 - User Manual

1. Package Contents
Product Manual / Warranty
4. Installation 8. Warranty Repair and Warranty Period
For warranty service, please contact your place of purchase.
1) The warranty period is 1 year from the date of purchase (excluding the Reactor).
2) This warranty does not apply where damage is caused by the Customer’s mishandling.
3) The Customer must provide this Warranty Certificate to receive any services under this
warranty.
4) Please do not lose this Warranty Certificate as it will not be reissued.
5) For repairs beyond the warranty period, please ask dealership.
6) The warranty period for the Reactor is 6 months from the date of purchase and it is possible
to repurchase the Reactor.
7) The Customer must also provide the label attached to the Product in order to receive any
services under this warranty. If the label is damaged, altered or removed, the Customer
cannot receive any services under this warranty.
This warranty does not apply if the Product is:
1) improperly repaired, modified or disassembled;
2) used for any purpose other than a freshwater aquarium;
3) used for any purpose other than an ordinary household aquarium
4) damaged by Acts of God or other external causes, including but not limited to, fire,
earthquake, fluctuation or surges of electrical power and lightning.
5. Precautions regarding the Water Quality in Aquarium
6. Cleaning the Reactor
7. Safety Precautions
2. Names of parts
3. Turning on the Power
TWINSTAR IC / TWINSTAR Reactor / Adapter / Suction Plates (3)
For optimal performance, please install the Reactor below 10~15cm of the Outflow.
Installing the Reactor in areas lacking water flow will cause reduction in performance.
1) Fix the Suction cups to the back of the Reactor.
2) Attach the Reactor below 10~15cm from the outflow in the tank.
3) Fix the Suction cups to the back of the TWINSTAR IC.
4) Once the Suction cups are fixed, attach the TWINSTAR IC to an appropriate area
on the aquarium’s outer wall.
5) Connect the Reactor Cable to the Power Output Terminal of the TWINSTAR IC.
6) Connect the Extension Cable to the Power Input Terminal of the TWINSTAR IC
and connect the Extension Cable to the Adapter.
7) Push the Power Button and check that it is operating normally.
1) Please completely remove any dust from the water for 3~5days before use.
2) Please completely remove the algae that has already occurred in the tank before
Installing TWINSTAR. It can not remove pre-existing algae.
3) You must take the Reactor off from the water due to soil dust when you maintain tank
or cut plant. Any dust in the water will shorten the life of the Reactor.
4) Please keep the power input/output terminal away from the water. Otherwise,
this will Cause a failure in the operation of the terminal due to corrosion.
In case the terminal is exposed to water, drain as soon as possible and let it dry.
5) Do not use this Product if you have put in salt in the water for medicated bath.
6) TWINSTAR can not be together used with fish medicine.
1) The Reactors are consumables, requiring them to be replaced during use.
2) If you want to clean the Reactor, first, add 20cc of sodium hypochlorite to 1,000cc of
water. Then, put the Reactor into the diluted solution for over 3 hours. Lastly, take out
the Reactor and wipe it with a soft sponge. You should only clean the plastic part and
never clean the metal nets as the metal nets have special coating on them.
This Product is only to be used in a freshwater aquarium, and not to be used in a salt water
aquarium. Do not use this Product for any purpose other than those specified above.
1) Please read the Product Manual and use the Product according to the instructions in this
Product Manual.
2) Please ensure that there is no safety problem with the living thing (including aquarium fish)
before installing the Product.
3) Do not clean the metal nets of the Reactor.
4) Please turn on the power after the Product has been completely installed.
5) Do not put your hands into the aquarium once you have turned on the power.
6) Do not drop the Product or apply strong force to it.
7) Please unplug the Power Cord when installing, removing, or retrieving the Product.
8) Please unplug the Power Cord if the Product is not to be used for a long time.
9) Do not modify or disassemble the Product. Also, do not use the Product in any manner
other than those specified above.
10) Please keep the Product out of reach of children.
Pushing the Power Button will turn on the power and start the operation.
Model
M3
Shrimp 30
20L ~ 50L
20L ~ 50L
40L ~ 50L
S3
Capacity
Date of Purchase
Customer’s Name
Address / Contact Number
Place of Purchase
01 ENGLISH
TWINSTAR IC
Power Button
Indicator Lamp
Power output
terminal
Power input terminal
Reactor

Summary

Package Contents

Names of Parts

Turning on the Power

Installation Instructions

Fix Suction Cups to Reactor

Attach suction cups to the back of the TWINSTAR Reactor for proper placement.

Attach Reactor to Tank

Mount the Reactor 10-15cm from the outflow within the aquarium tank.

Mount TWINSTAR IC

Fix suction cups to the TWINSTAR IC and attach it to the aquarium's outer wall.

Connect Reactor Cable

Connect the Reactor Cable to the Power Output Terminal of the TWINSTAR IC.

Connect Extension Cable

Connect the Extension Cable to the TWINSTAR IC's Power Input Terminal and then to the Adapter.

Check Operation

Activate the device by pushing the Power Button and verify normal operation.

Precautions for Aquarium Water Quality

Remove Water Dust

Ensure water is free of dust for 3-5 days before using the product.

Remove Existing Algae

Clean pre-existing algae from the tank before installing TWINSTAR.

Protect Reactor from Dust

Remove Reactor during tank maintenance to prevent dust from shortening its life.

Keep Terminals Dry

Prevent water exposure to power terminals to avoid corrosion and failure.

Avoid Saltwater;Medicated Bath

Do not use in saltwater or during medicated baths with salt.

Avoid Fish Medicine

TWINSTAR cannot be used concurrently with fish medicine.

Cleaning the Reactor

Reactor Consumability

Reactors are consumables and require replacement during use.

Cleaning Procedure

Clean plastic parts with diluted sodium hypochlorite solution; do not clean metal nets.

Safety Precautions

Freshwater Use Only

Product is for freshwater aquariums only; do not use in saltwater or for other purposes.

Read Manual and Follow Instructions

Always read the manual and use the product as instructed.

Ensure Living Thing Safety

Confirm product installation poses no safety risk to aquarium inhabitants.

Avoid Metal Nets Cleaning

Do not clean the metal nets of the Reactor due to their special coating.

Power On After Installation

Ensure the product is fully installed before turning on the power.

Do Not Insert Hands

Avoid placing hands into the aquarium once the power is turned on.

Handle With Care

Do not drop the product or apply excessive force to it.

Unplug Power Cord

Unplug the power cord during installation, removal, or retrieval.

Unplug for Long Storage

Disconnect the power cord if the product will not be used for an extended period.

No Modification or Misuse

Do not modify, disassemble, or use the product for unintended purposes.

Keep Out of Reach

Ensure the product is kept away from children.

Warranty Repair and Period

Warranty Service Contact

For warranty service, contact your place of purchase.

Warranty Period

Warranty is 1 year from purchase (excluding Reactor); Reactor warranty is 6 months.

Warranty Exclusions

Warranty void if damage is due to mishandling, improper repair, or external causes.

Warranty Certificate Requirement

Provide Warranty Certificate for service; it will not be reissued if lost.

Repairs Beyond Warranty

Contact dealership for repairs needed after the warranty period.

Product Label Requirement

Product label must be attached and unaltered for warranty service.

Warranty Inapplicable Conditions

Warranty does not cover products improperly repaired, modified, or used for non-freshwater/ordinary purposes.

Twin-Star International M3 Specifications