Why does my Twister Quadcopter Quattro-X not return home accurately?
The inaccurate return home of your Twister Quadcopter is likely due to a poor GPS signal. To resolve this, try flying in a more open area with a clear view of the sky.
What to do if the motors on my Twister Quadcopter don't spin?
If the motors on your Twister Quadcopter aren't spinning, ensure that the SWB and SWA switches are in their ‘0’ positions before attempting to unlock the motors. Also, check that the flight battery is adequately charged. Finally, make sure you have correctly unlocked the motors by moving the left stick to its bottom right position.
What to do if my Twister Quadcopter Quattro-X motors are spinning but it won't take off?
If the motors on your Twister Quadcopter are spinning but the Quattro-X won't take off, verify that the propellers have been installed correctly and are not upside down. Also, ensure that each propeller's rotation matches the rotation marked on each arm.
General| Brand | Twister |
|---|---|
| Model | Quattro-x |
| Category | Quadcopters |
| Language | English |
Critical safety warnings and precautions to be observed during operation.
Guidelines for selecting a safe and appropriate location for flying the model.
Information on model durability, common issues, and availability of spare parts.
Details of the product warranty, limitations, and liability.
Advice for new users on preparing the model and initial flight considerations.
General safety guidelines and operational responsibilities for radio-controlled models.
Pre-charging inspection steps for Li-Po batteries to ensure safety.
Detailed instructions and safety precautions for charging Li-Po batteries.
Guidelines and warnings for the safe handling and use of Li-Po batteries.
Information regarding EU directives for radio equipment and waste disposal.
Highlights the key features and capabilities of the Quattro-X quadcopter.
Details CAA regulations regarding Small Unmanned Aircraft and Surveillance Aircraft.
Specifies the maximum operational range and visual line of sight requirements.
Step-by-step guide for correctly fitting the Quattro-X propellers.
Instructions for attaching the landing gear struts and routing the antenna wire.
Guide on mounting action cameras and important Wi-Fi interference warnings.
Crucial warning about disabling camera Wi-Fi to prevent loss of control.
Detailed procedure for charging the Quattro-X Li-Po battery safely.
Explanation of the different LED lights and their meanings on the Quattro-X.
Details on the meaning of various LED light patterns and their operational status.
Diagram and explanation of the transmitter controls for Mode 2 configuration.
Diagram and explanation of the transmitter controls for Mode 1 configuration.
Procedure for pairing the Quattro-X model with its transmitter.
Step-by-step guide for calibrating the Quattro-X for stable flight.
How to ensure the Quattro-X acquires a stable GPS signal for advanced modes.
Safety procedure for arming and disarming the Quattro-X motors.
Guide to selecting different flight modes using transmitter switches.
Description of the basic Take-Off/Manual flight mode and its controls.
Explanation of how to activate and use GPS Mode for stable hovering.
Details on using Orientation Mode for easier flight control and orientation.
How to enable and use Altitude Hold Mode to maintain a constant height.
Instructions for activating the Return Home feature for automatic landing.
Warning system for low battery voltage and immediate landing instructions.
Automatic landing sequence triggered by critical low battery voltage.
Solutions for the model circling unexpectedly in GPS Mode.
Steps to resolve issues where the motors fail to spin.
Troubleshooting steps when motors spin but the model won't lift off.
Advice on improving the accuracy of the Return Home function.
Guidance on re-calibrating the Quattro-X for stable hovering.
To Next Page