Need help?Do you have a question about the Twister T4 and is the answer not in the manual?
General safety guidelines for operating, cleaning, and maintaining the T4 Trimmer, emphasizing personal protection and safe practices.
Guidelines for safe electrical connections, including circuit breaker specifications and extension cord usage to prevent hazards.
Safety precautions to be followed during the operation of the T4 Trimmer, including assembly and proper material handling.
Safety measures for performing maintenance on the T4 Trimmer, highlighting electrical hazards and qualified technician requirements.
Diagnosing and resolving issues causing a grinding sound from the T4 Trimmer's tumbler, including checking drive wheel and roller condition.
Troubleshooting a high pitch squeal from the helix blade, involving cleaning, bed knife adjustment, or bearing replacement.
Addressing product buildup on the brush and tumbler by adjusting lubrication, cleaning frequency, or operating environment.
Identifying and fixing causes of weak vacuum suction, such as blocked hoses, dirty filters, or impeller issues.
Solutions for when product is not exiting the T4 Trimmer, related to incline angle or excessive suction.
Troubleshooting reasons for product exiting the T4 Trimmer unprocessed, including blade condition, fullness, suction, and adjustments.
Diagnosing the cause of the T4 Trimmer's warning light, typically indicating the blade motor is under high load.
Resolving issues when the fault light is on and the machine has stopped, usually due to overload or excessive friction.
Troubleshooting why the T4 Trimmer's tumbler is not spinning, checking drive wheel contact, lubrication, and obstructions.
General| Brand | Twister |
|---|---|
| Model | T4 |
| Power Source | Electric |
| Throughput | up to 23 lbs/hr |
| Motor | 0.25 HP |
| Type | Trimmer |
To Next Page
