Two notes Audio Engineering Torpedo Captor X - 5.4 Torpedo Captor X in the Studio; 5.4.1 Bypass Processing & With Cabinet

Last
update:
2020/09/07
14:44
torpedo_captor_x:torpedo_captor_x_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_captor_x:torpedo_captor_x_user_s_manual
https://wiki.two-notes.com/ Printed on 2020/09/07 17:45
to add the cabinet simulation later in your mix with the plugin Torpedo Wall of Sound.
You are able to record two different amp signals at once in your DAW: the full Torpedo cab sim signal
from the LEFT XLR output of the Torpedo Captor X, and the dry amp signal from the RIGHT XLR
output.
5.4.2 With a cabinet
Connect your favorite cabinet and mic it to have 3 different signals recorded at the same time. Use
the different Volume Level settings to adjust the level of the cabinet.
5.5 Want more cabs?
5.5.1 Two notes cabinets
You can preview any cabinets that are not in your license when using Desktop Remote. This is why
when you browse the cabinets in the Remote the list is way bigger than what you have in your license
or in your Torpedo Captor X.