37
Draw tractor slowly away - Many operators stop about 300mm (12") away to double-
check that tractor and machine have completely separated and that no connections or
couplings remain connected.
Safety screens can now be removed if so desired.
Replace location pins back through arms of stabiliser assembly and secure in position
with 7/16 lynch pins.
Re-connect top link bar assembly back onto stabiliser with pin and lynch pin provided.
Replace lower linkage pins back into relevant positions on mounting frame and secure
with 7/16 diameter lynch pins.
Ensure tractor top link pin is replaced and secured with 7/16" lynch pin.
To Next Page
Loading...