It
em Name
Bluetooth earbuds 2 pcs
1 pcs
1 pcs
1 pcs
1 pcs
3 sizes(Big,Medium,small)
Charger case
User manual
Certification
Eartips
Use charger line
Quantity
F9
① Product Name: F9
② Bluetooth Version: Version 5.0
③ Protocol: Supports HFP 1.7, HSP 1.2,
AVRCP 1.6, SPP 1.2 and PBAP 1.0
④
⑤
⑥ Call Time: 5-6H (1 time full charged)
⑦ Play Music Time: 5-6H (1 time full charged)
⑧ Standby time:650H (With charger case)
⑨ Frequency:2402MHz~2480MHz
⑩ Battery type: 3.7V, >50mA Li Battery
Charging Time: 1-2H
Working Temperature: -10°-55°
Specification of charger case:
① Input current: 5V 1A
② Output current: 5V 1A
③ Battery type: 3.7V
④ Charging time:1-2H
① Make sure that the charging case has electricity. If the
charging compartment is out of power, please fully charge the
Repeated use: the earbuds has been connected with the mobile
phone--- open the phone Bluetooth, and take out thetwo earbuds
from the charging case, without any operation, it will connect with
the phone automatically . If you use a different phone, you need
to follow the steps in the instructions for use.
Special Note:The two earbuds are well paired before packaged,
but if they can not paired well due to some wrong operations, pls.
do as following steps to re-pair the earbuds. Power off the two
earbuds, then press the button of the two earbuds at same time
and do not release for about 10s, blue lights sparkled ----> red
and blue lights sparkled alternatively ---> release --->two
earbuds are in the situation of paired, and they are ready for
phone searching.
① please use the standard 5V charger (4.9-5.5V)
② Do not place the charging case and the Bluetooth earbuds
next to the flammable explosives.
③ Do not disassemble the charging case and Bluetooth earbuds,
or insert other items into the product to avoid damage to the
product or even cause harm to you.
Specification of Earbuds
Sketch
Fitting
How to operate the earbuds:
Warranty Card
FAQ and Solutions
Indicator description:
How to pairing
For the first time to use the earbuds or for a long time to no use,
please charge the charging case and earphones before, Please
keep it in an unobstructed and effective environment within 10
meters. Otherwise, it may be stuck and disconnected.
Enter into
the Settings
Select
Bluetooth in
your device
Turn on bluetooth
in your device
settings Select
"F9 " in your device's
bl
uetooth settings to connect
Bluetooth
Paired
Warming remain
Warranty certificate, please fill in and keep it safely
Phenomenon
Can not turn on /
Turn off automaticly
No hint after paired
Can talk but
red light is on
No lights on
when charging
Echo
There is noise
when talking
Low voice
Can not hear
the music
No output
from power supply
Check the power
supply ifconnected weill
Too large volume or too
noisy environmental
Environmental disturbance
or too far away from device
Not wear
earbuds correctly
The phone
doesn’t support
Adjust the
position of earbuds
Need a phone
support BT stereo
Change the environment
or move to place near
the device
Turn down the volume or
change the environmental
Red light is on
for lower battery
Charge for the earbuds
Not paired correctly Re-paired
Low battery
Charge the earbuds
for 2-5H
Failure Reason Solution
ProductName
Shop
After sale service
Sales date
L for Left R for Right
The earcap heads down
Smaller heads up
Adjust to the best fit
① Charge the earbuds: Put the earbuds into the charging case
and cover it to charge.
earbuds indicator: Lights up red when charging, and red light
when fully charged. The charging case flashes green and the
light is off after charging.
② Charge the charging case: Plug the 5V/1A USB into the
charging port to charge. During charging, the middle digit of
the charging stand display indicates the charging case power.
When the number is displayed as “100”, the battery is fully
charged.
Charging case indicator light: The charging flashes green light,
and the light is off after charging.
③ Charge to the mobile phone; 3 Charge the mobile phone:
Connect USB Cable to USB port of case to charge the mobile
phone.ChargingCase indicator light : Light will turn green when
charging and turn off when fully charged
Turn on: Press and hold the touch multi-function button for 3
seconds or take it out from the charging case, the earbuds will be
turned on automatically
Turn off: Press and hold the touch multi-function button for 5
seconds (Led light turn red and stay) to shut down, or directly put
the earbuds back into the charging case, the earbuds automatically
turns red and automatically turns off.
Answer and hang up: When phone coming,short press the touch
button one time,answer the phone, short press the touch button
one time when call end
Reject the phone：Press the touch button for 3s,reject the phone
Start Siri: Long press Right earbud or Left earbud for 1s you will
hear “DU”, release andphone voice ontrol is started. Siri
supported only
NEXT/PREV Songs: Double click on the Right earbud(R), it plays
next song, double click on the L earbud, it plays previous song
How to operate：
Note: This operation also clears the team record between the
phone and the earbuds, so you need to delete the Bluetooth
pairing record before the phone and then search for the
connection again.
Care and maintenance:
① To avoid any mis-operation caused by collision put the earbud
in charging case before put in your pocket
② Do not use a abrasive cleaner to clean the Bluetooth earbuds.
③ Do not expose the Bluetooth earbuds to excessive temperature.
④ Do not expose the earbud under the blazing sun for a long
time
Do not use this product while charging. Please use the adapter
specified by the manufacturer to charge the product. Do not
disassemble the built-in lithium battery. Do not let the metal
contact or short the electrode. Do not touch or squeeze the
battery to avoid Place in a humid or hot (>60 ° C) environment.
Commodity warranty card (warranty details)
1、From the date of purchase to the warranty period of three
months, if the machine fails, the technician will confirm that the
fault is under normal use, and free repair and spare parts
replacement service will be provided.
2、The company will refuse to provide warranty service in the
following circumstances;
a、The product has been mishandled, negligently used or
accidentally caused by natural disasters and man-made disasters.
b、The product is repaired and modified by non-technical
personnel of the company.
c、The product body number has been converted, altered or
removed.
d、 The product does not provide installation instructions
according to the original factory.
3、Third, the free service provided by this warranty card does
not include product accessories, and other decorations and other
items.
4、The Company will not be liable for any direct or indirect loss
of equipment damage.
5、The contents of this warranty card are subject to change
without prior notice.
Packing details:
11
12
Bluetooth
Earbuds User Manual
Battery
Level Indictor
Battery
Level Indictor
Battery
Level Display
Earbud
LED Indictor
Earbud
LED Indictor
USB Port
Multifunction
Touch Button
X7
F9
F9
Setting Setting
charging compartment;(Pick up the two earbuds and put them
back on the cover. The charging compartment indicator lights
up to indicate that there is power. If it does not light, it means
no power.)
② Take the two earbuds out of the charging case and wear them
on the left and right ears respectively. The earphones will
automatically turn on and automatically pair;(Voice prompt:
power on, left channel, right channel, waiting for connection).
③ Turn on the phone Bluetooth and click on the connection pair
name "F9" to connect (voice prompt "Connected").
Volume +/-: Constinuous press right earbud 3 times to turn up
the volume; continuous press left earbud 3 times to turn down
the volume, or you can adjust the volume on the phone directly.
Track Backward
Click
Twice
Click
Twice
Earbud (R)
headphone (L)
Earbud (R)
headphone (L)
Track Forward
Single
Earbud Mode：When the main earbud (R) and the secondary
earbud (L) are not connected, taking out one of any of the earbuds
separately from the charging case. The earbud prompts “turn on”,
then for 3 seconds, the blue light flashes---the red and blue lights flash
alternately, open the mobile phone Bluetooth function, search for the
Bluetooth device and Click Connect, the “Bluetooth Connected ”
will
be displayed in the upper right corner of the phone screen, and the
earbud will prompt “Connected”, or the manual operation of a single
earbud will repeat the above operation.
Remark: Single use
Main earbuds(R) Bluetooth name: F9
secondary earbud (L) Bluetooth name: F9 L
⑤ Do not let the Bluetooth earbuds be close to the fire source.
⑥ Do not drop, bump, scratch, twist, tap, crush, or put into the water.
⑦ Keep away from magnets, appliances and speakers when
using Bluetooth earbuds.
⑧ Do not place the Bluetooth earbuds in extreme temperature
(use ambient operating temperature range -10°C-55°C)
⑨ Do not expose the Bluetooth earbuds to moisture.
⑩ If you do not use the Bluetooth earbuds for a long time,
please charge it fully and charge it once a week to extend the life
of the Bluetooth earbuds.
Safety guidance:
Serious warning:
Setting Bluetooth Setting Bluetooth
Bluetooth
Bluetooth Turn off Bluetooth Turn off
Bluetooth
Bluetooth Name Bluetooth Name
Others Others
Connectted
Disconnectted
Volume +
Volume -
Click 3
times
Click 3
times
Chipset: BT8812E
Working distance: 10M
To Next Page
Need help?
General
