About this Manual
This manual is intended for trained service technician/personnel with hardware
knowledge of computers. Component inside the compartment should be serviced
only by a trained service technician/personnel. This manual is aimed to provide you
with instructions on installing your TYAN TS75A-B8252.
How this guide is organized
This guide contains the following part:
Chapter 1: Overview
This chapter provides an introduction to the TYAN TS75A-B8252 barebones and
standard par list, describes the external component, gives an overview of the
product from different angles.
Chapter 2: Setting Up
This chapter covers procedures on installing the memory modules, hard drivers and
other optional par.
Chapter 3: Replacing the Pre-installed Component
This chapter covers the removal and replacement procedures for pre-installed
component.
Chapter 4: Installing GPU Card
This chapter introduce how to installing the GPU Card and list how many kinds GPU
Cards are suitable for TS75A-B8252 chassis.
Appendix:
This chapter provides the cable connection table, how to install IO plate for OCP
Card, the FRU par list for reference of system setup, and technical support in case a
problem arises with your system.
To Next Page
