To Next PageTo Next Page
Need help?Do you have a question about the Tyco Fire Product Gem F302 and is the answer not in the manual?
Provides a general overview of Model F302/F3021 Dry Pipe Valves, their function, and application.
Illustrates and lists nominal dimensions and port locations for 4-inch and 6-inch valve models.
Lists approvals and standards the valves comply with, including UL, ULC, FM, and others.
Emphasizes the importance of installing and maintaining valves according to the document and NFPA standards.
Details technical specifications such as pressure ratings, NPT threading, and flange drilling.
Outlines system air pressure requirements as a function of water supply pressure.
Describes the optional Model F311 Dry Pipe Valve Accelerator.
Explains how the differential latch type valves maintain set position and operate on fire detection.
Presents graphs showing pressure drop versus flow rate for 4-inch and 6-inch valves.
Explains how system air pressure, intermediate chamber, and alarms function during operation.
Covers critical notes for proper installation, including trim, cleanliness, and location.
Step-by-step guide for setting the Model F302/F3021 Dry Pipe Valve after installation or operation.
Provides nominal installation dimensions for the 4-inch Model F302/F3021 Dry Pipe Valves.
Provides nominal installation dimensions for the 6-inch Model F302/F3021 Dry Pipe Valves.
Lists components included in the factory-assembled valve trim.
Provides specifications for nipples and fittings used in valve trim.
Details the annual procedure to verify the proper operation of the F302/F3021 Valve.
Describes the quarterly testing procedure for system waterflow alarms.
Outlines weekly inspection requirements for water and air pressure gauges.
Specifies weekly inspection of the automatic drain valve and troubleshooting steps.
Details inspection of priming water levels after operation tests or system events.
Provides warranty information for the dry pipe valves.
Details how to check and adjust the auxiliary clapper assembly for proper seating.
Recommends checking auxiliary clapper assembly seating after resetting or component replacement.
Discusses material changes (brass to stainless steel) for components and recommends upgrades.
Recommends replacing flat clapper facing with molded ribbed type for improved durability.
Notes a redesign of the clapper latch for the 6-inch valve and potential adjustment needs.
Mentions the addition of an internal bore O-ring to the auxiliary seat ring as of 1986.
Emphasizes replacing missing automatic drain valves and proper trim installation.
Lists recommended parts to have on hand for servicing the valves.
Specifies how to order standard valves with ANSI flange drilling.
Specifies how to order special valves with ISO flange drilling.
Details how to specify and order replacement valve parts by description and PSN.
Lists accessories and corresponding technical data sheets for reference.
Describes the contents of the valve replacement parts kit and how to order it.
Lists the nominal weights for Model F302 and F3021 Dry Pipe Valves in kg and lbs.
Lists the nominal weight for the valve trim in kg and lbs.
General| Brand | Tyco Fire Product |
|---|---|
| Model | Gem F302 |
| Category | Control Unit |
| Language | English |
