EasyManuals Logo

Tyco 3G4010 v4.0 User Manual

Tyco 3G4010 v4.0
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
l Primary: Compatible listed control unit's land line to central station (primary).
l Secondary: LE4010 transmission through wireless network to central station.
Every 24 hours, a check-in signal must be sent to the central station over the primary dialer. The LE4010 sends
a heartbeat test transmission to the supervising station every 24 hours. Each communication path shall be mon-
itored for integrity (DACT shall have line monitoring enabled and LE4010 shall have cellular connection
supervision enabled).
Power for model LE4010 shall be provided by one of the two compatible power supplies:
a. Mircom Model DTC-300A(W)(R), digital alarm communicator transmitter
b. Simplex control panel 4100U with converter module 4100-5152 installed
Note: Wiring between the LE4010 and FACP/Power Supply shall be made in the same room, in metal conduit
and not longer than 20ft.
3G4010/LE4010 Installation Manual

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tyco 3G4010 v4.0 and is the answer not in the manual?

Tyco 3G4010 v4.0 Specifications

General IconGeneral
BrandTyco
Model3G4010 v4.0
CategoryCell Phone
LanguageEnglish

Related product manuals