To Next PageTo Next Page
Need help?Do you have a question about the Tyco BTEL-3G and is the answer not in the manual?
General| Brand | Tyco |
|---|---|
| Model | BTEL-3G |
| Category | Cell Phone |
| Language | English |
Details the meaning of the green, red, and yellow status indicator lights for GSM reception and device status.
Explains how to access and navigate the device's user menu using the keypad or remotely.
Guide to configuring device parameters using the physical keypad and voice prompts.
Instructions for programming the device remotely via PSTN or GSM phone using touch-tone commands.
How to manage device features by sending specific SMS commands to the unit.
Configuration and control of the device's open collector outputs (OC1, OC2, OC3, OC4).
How to check the active/inactive status of the device's inputs (L1, L2, L3, L4).
Enabling the sensitive microphone to listen to the protected area remotely.
Procedure to block incoming calls or text messages to the device, and manage call confirmation.
Instructions for changing the default 5-digit User PIN for enhanced security.
How to initiate a live phone call using the device's dialer function.
Managing stored telephone numbers, including writing, reading, and deleting entries.
Details on the two dedicated SUPERKEYS (1 and 2) for performing specific actions.
Configuring open collector outputs as bistable or monostable via SMS commands.
How to check the remaining credit balance of a pre-paid SIM card via SMS.
Setting up the device to notify about the SIM card's expiry date via SMS.
Enabling outputs (OC1-OC3) using Caller ID without incurring call costs.
