8
BTEL-3G
Hereby, Bentel Security declares that the radio equipment type BTEL-3G is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.bentelsecurity.com/dc.
Instructions in this manual applies to devices with firmware revision 1.0.30 and above.
Installation of these systems must be carried out strictly in accordance with the instructions described in this manual, and in
compliance with the local laws and bylaws in force. The above mentioned BTEL-3G has been designed and made to the highest
standards of quality and performance. The manufacturer recommends that the installed system should be completely tested at
least once a month.
BENTEL SECURITY srl shall not be responsible for damage arising from improper installation or maintenance by
unauthorized personnel.
BENTEL SECURITY srl reserves the right to change the technical specifications of this product without prior notice.
TABLE OF CONTENTS
Recycling information
BENTEL SECURITY recommends that customers dispose of their used equipments (panels, detectors, sirens, and other
devices) in an environmentally sound manner. Potential methods include reuse of parts or whole products and recycling
of products, components, and/or materials.
For specific information see: www.bentelsecurity.com/index.php?o=environmental
Waste Electrical and Electronic Equipment (WEEE) Directive
In the European Union, this label indicates that this product should NOT be disposed of with household waste. It
should be deposited at an appropriate facility to enable recovery and recycling.
For specific information see: www.bentelsecurity.com/index.php?o=environmental
ENGLISH 9
Status LEDs 9
User menu 9
Programming by keypad 9
Remote programming 10
Dialer Parameters Management ........................................... 10
Environment Listen Management ......................................... 11
Block Calls .............................................................................. 11
Change Code ........................................................................ 11
Dial Number ........................................................................... 11
Phone Book Management ..................................................... 11
Superkeys .............................................................................. 12
Remote Programming by text message 12
Output Management .............................................................. 12
Pay As You Go ........................................................................ 13
Expiry date of the SIM card .................................................... 13
Activate the Outputs via Caller Identification ........................ 13
NOTE FOR THE INSTALLER: you can find the complete Instal-
lation Manual at www.bentelsecurity.com/qr/1070102 or you
can view it on smart phone or tablet by reading the QR code
to the right.
To Next Page
Loading...
