Need help?Do you have a question about the Tycoon TC3VI32-09 and is the answer not in the manual?
Explains warning and caution symbols for understanding potential risks.
Critical warnings regarding electrical safety, usage, and supervision.
Further warnings on electrical work, wiring, and specific installation hazards.
Precautions for units containing fluorinated gases.
Details of all parts included for installation.
Information on connecting pipe types and sizes required.
Safety warning on minimum room sizes for specific refrigerants.
Steps for choosing location and preparing the wall hole.
Securing the mounting plate and preparing refrigerant piping.
Steps for connecting essential internal components.
How to bundle cables and mount the indoor unit.
Visual identification of all major components of both units.
List and description of each numbered part shown.
Checks before installation and ideal location standards.
Locations to strictly avoid for indoor unit placement.
Steps for attaching the mounting plate and drilling the wall hole.
How to prepare and route refrigerant piping.
Connecting the drain hose and ensuring proper drainage.
Connecting electrical wiring and signal cables.
Guidance on cable selection and critical wiring safety.
Bundling components and final unit mounting.
Information on adjusting unit position for easier pipe connection.
Standards for choosing an appropriate outdoor unit location.
Locations to strictly avoid for outdoor unit placement.
Advice for installations in harsh weather conditions.
Steps for installing the drain joint on the outdoor unit.
Procedures for securely anchoring the unit to the ground or a platform.
Steps for installing the unit on a wall-mounted bracket.
Instructions for connecting electrical cables to the outdoor unit.
Location of wiring diagram and guidance on cable selection.
Table of maximum pipe lengths and drop heights for different models.
Procedures for cutting, removing burrs, and flaring pipes.
Detailed steps and torque requirements for indoor unit connection.
Detailed steps for connecting pipes to the outdoor unit.
Essential checks and steps for evacuating the system.
Guidelines and calculations for adding refrigerant.
Checks for electrical safety, grounding, and leakage.
Procedures for checking refrigerant leaks using soapy water or detectors.
Essential checks before initiating the test run.
Steps for conducting the test run and verifying functions.
Alternative method for testing cooling function in cold environments.
Available methods for disposing of the appliance according to regulations.
Notice on the negative environmental consequences of incorrect disposal.
Safety precautions for working with flammable refrigerants.
Managing work areas and eliminating ignition sources.
Acceptable methods for detecting refrigerant leaks.
Steps for safely removing and evacuating refrigerant from the system.
Procedures for charging refrigerant and decommissioning the unit.
Best practices for recovering and handling refrigerant cylinders.
Guidelines for safe transportation, marking, and storage of units.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Type | Split |
| Net Weight | 25 kg |
To Next Page