Page 4 of 9
1. Description.
This is a portable product of mobile power + wireless transmitter, which uses
cost-effective integrated chip, high-quality ultra-thin polymer lithium-ion battery,
cost-effective products that meet safety standards.
2. Input Characteristics.
2.1.Lightning Input voltage: 5V
When the Lightning input is charged, the priority Qi wireless charging works, the
wireless charging is 5W, and the input maximum current is 1.5A (the wireless charging
conversion rate is ≥61%).
When the wireless charging stops or does not work, it automatically switches to the
mobile power charging, the charging current is 1A-2A (Note: the charging current depends
on the battery voltage).
Note: When the Lightning input is charged, the USB port has no output.
3. Key function description.
3.1.Tap to open the output, often press to close the output;
3.2. When you need to check the power, you need to press the button once.
4. Output Characteristics.
4.1. When the USB port has a mobile phone, it preferentially outputs 5V/2.1A to the
USB port and turns off the wireless charging;
4.2. When the USB port is not loaded, the wireless charging is automatically turned on,
and the wireless charging output is 5W; (Note: the wireless charging conversion rate is ≥
55%);
Note: Wireless charging conversion rate ≥ 55%
4.3. When the USB port is not connected to the mobile phone, when the wireless
To Next Page
Loading...
