EasyManua.ls Logo

TYLZA KME06-30 - User Manual

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Professional Built-In Range Hood
Model Name:KME06-30"/ KME06-36"
INSTALLATION GUIDE
AND USERS MANUAL
NOTICE:
For residential use only.
Installer: Leave this guide with the homeowner. Homeowner: Keep this guide
for future reference.
Email addressSupport@itylza.com Phone number: (213)352-5535
Question and Answer IconNeed help?

Do you have a question about the TYLZA KME06-30 and is the answer not in the manual?

Summary

Customer Contact Information

Support Channels and Hours

Provides email, phone number, and operating hours for customer support.

Important Safety Notices

General Safety Precautions

Mandatory safety guidelines for installation and operation to prevent hazards.

Fire Prevention and Extinguishing

Measures to prevent and respond to fires, including grease fires.

Gas Leak Safety Procedures

Steps to take in case of a gas leak to ensure safety.

Understanding Warning Symbols

Explanation of safety alert symbols and their meaning.

Electrical Requirements

Grounding and Circuit Specifications

Details on proper grounding, circuit protection, and wire requirements.

Wiring Connections

Guidelines for connecting the range hood to the power supply using appropriate cable.

Venting Requirements

General Venting Guidelines

Rules for terminating ductwork, material usage, and airflow maintenance.

Optimizing Vent Performance

Tips for efficient and quiet operation, including elbow usage and duct length.

Mounting Height and Duct Size

Recommended height ranges for installation and minimum duct size.

Calculating Vent System Length

Duct Run Calculation Method

Procedure to calculate total duct length by deducting vent piece equivalents.

Specifications

Technical Specifications Table

Detailed specifications including body material, power, motor, airflow, and noise level.

Required Tools

List of Necessary Tools

Visual guide to tools required for installation, such as screwdrivers and tape measures.

Parts Supplied

Included Components Overview

Illustration and list of parts provided with the range hood for installation.

Dimensions

Range Hood Dimensional Data

Diagram showing overall dimensions and a table for model-specific measurements (A and B).

Preparation

Pre-Installation Safety Warnings

Critical warnings regarding sharp edges, heavy weight, and physical damage checks.

Advanced Preparations Steps

Steps before installation, including reading the manual and testing the unit.

Initial Setup Procedures

Steps to prepare the hood for installation, like removing filters and tunnels.

Installation Guide

Cabinet Opening and Transition Attachment

Instructions for cutting cabinet openings and attaching the vent transition.

Mounting Considerations

Guidance on using pre-drilled holes, secure installation, and avoiding drywall anchors.

Installation Procedures

Electrical Safety and Grounding

Warnings about electrical shock hazards and proper grounding procedures during installation.

Installation Schematic Overview

Schematic showing ducting, outlet location, and cabinet spacing for installation.

Installation Option 1: Bracket Mounting

Plywood Back Support Installation

Steps for attaching a plywood back support and securing the hood with screws.

Wall Vent Duct Connection

Procedure for connecting ductwork to a wall vent, including elbow and transition.

Optional Roof Vent Duct Connection

Instructions for connecting ductwork to a roof vent, ensuring proper passage.

Installation Option 1 Continued

Final Hood Securing with Screws

Final steps to fasten the hood using screws into installation holes and wooden frames.

Installation Option 2: Woodblock Mounting

Woodblock Fabrication and Support

Steps for creating a plywood back support and fabricating a fire-rated woodblock.

Hood Placement and Duct Connection

Instructions for inserting the hood into the cabinet and connecting ductwork and power.

Installation Option 2 Continued

Securing Hood to Woodblock

Securing the range hood to the prepared woodblock using screws.

Filter Installation

Grease Filter and Tunnel Placement

Visual guide for installing stainless steel filters and the grease tunnel.

Venting Methods

Roof and Wall Venting Procedures

Guidelines for venting through the roof or wall, including duct sealing and elbow use.

Venting Height and Climate Adaptations

Information on recommended venting heights and insulation for cold climates.

Circulating Charcoal Filter Installation

Ductless Model Filter Setup

Instructions for installing charcoal filters for vent-less or recirculation operation.

Wiring Diagram

Electrical Connection Schematic

Diagram illustrating the electrical connections for the fan motor, lights, and power supply.

Range Hood Operations

Control Panel and Button Functions

Explanation of buttons (Plus, Minus, Timer, Light, Auto Power Off) and their uses.

Gesture and Remote Control Modes

Details on operating the hood using gesture control and the remote control features.

Troubleshooting Guide

Common Operational Issues and Solutions

Guidance for resolving problems like non-operation, vibration, weak airflow, and venting issues.

Use and Care

Safe Operating Practices

Essential tips for safe operation, including keeping grills in place and avoiding open flames.

Cleaning Procedures

Instructions for cleaning the unit to prevent fire hazards and maintain performance.

Maintenance and Cleaning

Exterior Surface Care

Methods for cleaning stainless steel surfaces without causing damage.

Grease Filter and Grill Maintenance

Procedure for cleaning metal filters and grills to remove grease and residue.

Filter Replacement Guidance

Information on ordering replacement filters when existing ones wear out or get damaged.

Bulb Replacement

Replacing LED Light Fixtures

Step-by-step guide for safely replacing the LED light bulbs in the range hood.

Exploded Diagram

Range Hood Component Identification

An illustrated diagram showing all parts of the range hood with corresponding numbers.

Warranty and Service Information

Warranty Terms and Exclusions

Details on the warranty duration, what is covered, and common warranty exclusions.

Warranty Claim and Contact Procedures

Steps to follow when filing a warranty claim or seeking customer service.

Customer Support Contact Details

Contact details including website, email, and phone number for support and service.

TYLZA KME06-30 Specifications

General IconGeneral
TypeUnder Cabinet
MaterialStainless Steel
CFM300
Number of speeds3
Control TypePush Button
LightingLED
Filter TypeAluminum
Width30 inches