TYM T1003 - OPERATING KEY LEVERS AND SWITCHES

►
►►
► FORWARD/REVERSE LEVER (POWER SHUTTLE LEVER)
Ensure Forward/Reverse lever is set to neutral position,
When the machine is stopped or Before starting the Engine.
Drive direction can be changed without depressing the clutch pedal.
[A] direction – Forward Drive
Push the Forward/Reverse lever upward to select forward drive
[B] direction – Reverse Drive
Pull the Forward/Reverse lever downward to select reverse drive
►
►►
► COMBINATION SWITCH (COLUMN S/W)
Combination S/W lever is a 3 function Lever
for Turn Signal S/W, Head light S/W, Horn.
■ Turn Signal S/W
[A] direction – Left Turn Indicator
Push the Combination S/W lever upward to operate Right
indicator lamp.
[B]
direction
–
Right
Turn
Indicator
34
[B]
direction
–
Right
Turn
Indicator
Pull the Combination S/W lever downward to operate
Left indicator lamp.
■ Head light S/W
[Side/tail lights]
Position the indicator ① on the knob ⑤ in alignment
with the symbol ③ to operate Side/tail lights.
[Low Beam Light]
Position the indicator ① on the knob ⑤ in alignment
with the symbol ② to operate Low Beam Light.
[High Beam Light ]
Combination S/W lever down and position the indicator
① on the knob ⑤ in alignment with the symbol ②
to operate High Beam Light.
■ Horn
Press the end of the Combination S/W lever to sound.