TYM T1003 - MAINTENANCE AND ADJUSTMENT SCHEDULE

Important
It is strongly recommended that tire pressures are checked with a proper gauge only
& visual inspections are relied upon.
Excess tire pressure can cause accidents!
Danger
■ Steering
Ensure that the steering wheel does not have excessive free play.
■ Brake
Ensure that the left and right brakes are adjusted correctly so they operate simultaneously. The correct
free play on the brake is 1.18-1.57 in (30~40 mm).
■ Clutch
Ensure that the clutch is adjusted correctly.
Correct free play on the clutch pedal is 0.78-1.18 in (20~30mm).
Incorrect clutch adjustment can cause excessive wear and reduced tractor
67
Incorrect clutch adjustment can cause excessive wear and reduced tractor
performance.
Caution
■ Electrical
Check the operation of all gauge, switches, horn, lights and indicators.
■ Installing loader
1.Connect P port of loader control valve to the line
on the tractor marked P(from the PTO valve)
2.Connect the T port on the loader control valve
to the line on the tractor marked T
3.Connect the remaining line from the control valve
to the line on the tractor marked P1
( to the transmission housing)
■ Detaching the loader
1.Detach the hydraulic hoses of loader
2.Assemble the cap (UNF 7/8-14) with pipe comp (UNF 7/8-14).