2. Before starting regeneration, apply the parking brake and idle the engine.
Then, the ACK lamp blinks. However, the regeneration process is not performed if the regeneration
activation conditions are not satisfied.
3. Press and hold the ACK button for 3 seconds and release it.
Then, the ACK lamp and exhaust temperature lamp are illuminated and the engine speed is increased up to
2200 RPM to perform the regeneration process for approx.
30 minutes.
4. As soon as the regeneration process is completed, all the lamps are turned off.
ExhaustTempLamp
ACK Lamp
Never move the vehicle to another place during regeneration process. Sudden movement
can result in an accident.
Caution
42
To Next Page
Loading...
