SAFETY
Make sure all parked loaders on stands are on a
hard level surface with all safety devices
engaged to prevent loader from falling and
being damaged or injuring someone.
Contact with overhead power lines can cause
severe electrical burn or death from
electrocution.
Make sure there is enough clearance between
raised equipment and overhead power lines.
Do not stand, walk or work under a raised
loader or attachment unless it is securely
blocked or held in position. Accidental
movement of a control lever or leak in the
hydraulic system could cause the loader to
When using a loader, be alert of bucket position
at all times. Loader in raised position with
bucket rolled back can dump material on tractor
causing damage or injury to tractor and / or
operator.
Add recommended rear tire liquid weight or
rear wheel weights for increased stability.
A loader attachment should be transported in
a low position at slow ground speeds. Make
turns slowly and use the tractor brakes
cautiously. A loaded attachment in the raised
position alters the center of gravity location of
the machine and increases the possibility of
mishaps.
Always park loader with bucket attached to
loader.
- 5 -
injury.
- 5 -
To Next Page
Loading...
Need help?
General
