typecase TOUCH - Page 3

TECHNICAL SUPPORT
If you encounter any difficulties or have inquiries, please do not hesitate to reach out to us
at your earliest convenience.
For the quickest and most efficient support experience, please contact us directly through
one of the following channels, rather than through Amazon.
1. Email: support@typecase.co
2. Phone: 832 - 303 - 5080
3. Chat: https://typecase.co/support
SETUP
To Pair with Your iPad:
1.
Turn the
ON/OFF
switch to the 'ON' position.
The Bluetooth indicator light will start to blink. If
2.
it doesn't, hold down the 'Pair' button for 3
seconds.
3.
Go to the Settings app and turn on Bluetooth.
(The device is connected when the Bluetooth
indicator stops flashing.)
Settings
Mode
il Bluetooth
Bluetooth
On
Bluetooth
MY DEVICES
Typecase Flexbook
On/Off Switch
pair
Connected
In the Bluetooth section of the Settings app, select 'Typecase Flexbook' under
4.
DEVICES'.
Tap 'Pair' in the pop-up window as
5.
shown.
*Note: To pair with new devices, repeat
steps 1-5.
Pairing complete when "Connected"
indicator appears.
Pair