To Next PageTo Next Page
Need help?Do you have a question about the TZS First AUSTRIA FA-5676-4 and is the answer not in the manual?
General| Brand | TZS First Austria |
|---|---|
| Model | FA-5676-4 |
| Product Type | Hair Clipper |
| Number of Combs/Attachments | 4 |
| Blade Material | Stainless Steel |
| Power Source | Battery |
| Cutting Lengths | 3mm, 6mm, 9mm |
| Charging Time | 8 hours |
| Usage Time | 45 minutes |
Store the appliance in a dry, dust-free place when not in use for extended periods.
Charge the appliance using the power adapter.
Clean and lubricate the cutting head or replace it.
Protect the environment by properly disposing of batteries and electronics.
Contact a dealer or authorized service center for malfunctioning appliances.
Details include power supply input/output and operating parameters.
This unit can cut head, beard, nose, and ear hair. It is rechargeable and can be used with or without the power adapter.
Ensure your home's supply voltage matches the appliance's rating plate.
Keep away from children, use indoors only, and ensure hands are dry when handling.
Never submerge in water, keep away from wash-basins, and use only approved extension cords.
Unplug when not in use or during thunderstorms; use trained service engineers for repairs.
Avoid touching moving blades to prevent injury; check blades and combs before use.
Keep distilled oil out of reach of children; seek medical attention if swallowed.
Use only the supplied AC adapter; do not expose the trimmer to extreme temperatures.
Immediately pull the mains adapter if the device falls into water; handle adapter with dry hands.
Use only the supplied adapter, check for defects, do not repair yourself, and protect the lead.
Disconnect adapter after use, operate according to rating plate, and stop use if damaged.
Charge batteries for at least 8 hours before first use for optimal performance.
Repeat full charge/discharge cycles to maximize battery capacity and lifespan.
Lists and identifies all parts of the hair clipper set, including blades, combs, and accessories.
Lubricate razor blades before each use for optimal results and smooth operation.
Keep hair clean and dry; select appropriate comb; cut gradually without excessive force.
Insert shaver head, push switch up, move against hair growth direction, and push switch down.
Insert clipper head, adjust length with cutting size switch and guide combs.
