Do you have a question about the TZUMI Tag-It and is the answer not in the manual?
Press and hold the button for 3 seconds until you hear two beeps.
Press and hold the button for 3 seconds until you hear a long beep sound.
Connects automatically when powered on; click 'Connect' if disconnected.
Switch on 'Do not disturb' in settings to shut down all alert functions.
Double click Tag-It to trigger; use red flash button or 'Stop Alert' to stop.
Press 'Photograph' to enter camera mode; control flashlight and camera.
Press button to mark car location on map; find via 'Location list'.
Pin-drop marks lost item location on map; find via 'Lost history'.
Configure an app password for security.
Choose between Google map or Baidu map.
Configure actions for double-clicking the button.
View and manage recorded voice memos.
Use a coin to twist open the battery cover and replace the CR2032 cell.