Why is the fresh food section of my U-Line LCD Drawer too cold?
If the fresh food section of your U-Line LCD Drawer is too cold, make sure the drawer(s) is closed correctly. If the drawers are properly closed, check the temperature control setting and set it to a warmer setting, allowing 24 hours for the temperature to stabilize. Also, ensure you are checking the temperature properly to rule out an inaccurate reading.
Why is the freezer section of my U-Line LCD Drawer too warm?
If your U-Line LCD Drawer's freezer section is too warm, ensure the drawer(s) is closed correctly. An improperly closed drawer can cause the freezer to not maintain the correct temperature.
What does it mean when my U-Line LCD Drawer shows 0, 1-26, or 99?
If the electronic display on your U-Line LCD Drawer shows 0, 1 to 26, or 99, it means a factory control mode has been inadvertently entered. To correct this, repeatedly touch the warmer temperature button to advance any number shown to 99, then touch and release the LIGHT button. The set-point temperature should now be displayed.
Why is the U-Line LCD Drawer display flashing random symbols?
If the electronic display of your U-Line LCD Drawer shows repeating, randomly flashing symbols and partial characters, it indicates that a factory control mode has been inadvertently entered. To exit this mode, touch and hold the warmer temperature button, then touch and release the LIGHT button three times. Finally, release the temperature button. The set-point temperature should now be displayed.
What to do if U-Line LCD Drawer display is blank but light is on?
If the electronic display on your U-Line LCD Drawer is blank, but the interior light is ON when the door is OPEN, a display function has likely changed. To restore the display, touch and hold the warmer temperature button, then touch and release the POWER button three times. Finally, release the temperature button. The display should then become visible.
What does E3 or E10 mean on U-Line LCD Drawer display?
If the electronic display of your U-Line LCD Drawer shows E3 or E10, it means the drawer(s) have been open for longer than 20 minutes. To resolve this, close the drawer(s) completely. The set-point temperature should then be displayed.
How to fix U-Line LCD Drawer when it doesn't turn on?
If your U-Line LCD Drawer unit does not operate and the electronic display is blank, the most likely cause is a lack of electrical supply. Ensure the unit is properly plugged in or check the circuit breaker to see if it has tripped. This should restore power to the unit and resolve the issue.
General| Brand | U-Line |
|---|---|
| Model | Combo CO2175DWR |
| Category | LCD Drawer |
| Language | English |
Process to validate the product warranty.
Guide to recording unit's model and serial numbers.
Explains Danger, Warning, and Caution risk levels.
General safety guidelines for appliance use.
Warnings about electrical grounding, extension cords, and anti-tip kit.
Advice on moving, defrosting, and operating the unit safely.
Specifics of the Combo Drawer model's design and capacity.
Key design and functional attributes of the Échelon line.
How to operate interior lights and blackout mode.
Explanation of the digital control panel layout and buttons.
How to select between Fahrenheit and Celsius displays.
How to view and adjust refrigerator temperature settings.
Information on ice production, normal sounds, and cube separation.
Descriptions of sounds from compressor, evaporator, fan, and defrost.
How to remove and use the ice bucket, and accessory options.
Guidelines for storing items in drawers and organizer.
How to use and adjust the top storage bin and its organizer.
Steps for extended non-use, including draining and cleaning.
Procedures for safely disposing of the appliance.
Methods for cleaning black and stainless steel exteriors.
How to clean the inside of the unit and avoid damage.
Procedure for cleaning condenser fins for efficiency.
Annual maintenance for the ice maker's water inlet screen.
How to adjust the size of ice cubes produced.
Steps to ensure the unit is installed level for proper operation.
Instructions for safely replacing the interior light bulb.
Steps to take before contacting service for malfunctions.
Guidance on when and how to contact U-Line for service.
Importance of using genuine U-Line replacement parts.
Solutions for problems with unit power, display, and lights.
Troubleshooting for unit not cold enough or airflow blockages.
Diagnosing problems with drawers not closing or ice maker function.
Quick reference for turning unit on/off and adjusting temperature.
Control functions unique to glass door models, like cabinet light.
Quick guide for ice maker modes and cleaning cycles.
Terms and duration of U-Line's limited warranty.
List of items and conditions not covered by the warranty.
Procedures for notifying U-Line about defects and seeking service.
Contact details for general questions and website.
Contact information for technical support and parts ordering.
Information about U-Line's range of appliances.
To Next Page