To Next PageTo Next PageWhat to do if the light remains on when the door is closed on my U-Line U-1075BEVS-15?
If the light in your U-Line Refrigerator stays on even when the door is closed, turn off the light switch, if your unit has one. You can also try adjusting the light actuator bracket located on the bottom of the door.
General| Brand | U-Line |
|---|---|
| Model | U-1075BEVS-15 |
| Category | Refrigerator |
| Language | English |
Explains the meaning of Danger, Warning, and Caution safety symbols.
Lists essential safety guidelines for appliance usage and installation.
Details the importance and types of proof of purchase for warranty claims.
Explains the structure and meaning of the unit's serial number.
Steps and contact information for ordering necessary replacement parts.
Step-by-step instructions for accurately measuring the unit's internal temperature.
Describes common sounds produced by the appliance during normal operation.
Explains the function and operation of the unit's temperature control dial.
Guidance on how to adjust the unit's temperature setting for optimal cooling.
How to align and adjust refrigerator doors for proper sealing and operation.
Information on which models allow the door to be mounted on the opposite side.
Step-by-step instructions for physically reversing the door hinge assembly.
Steps for hinge installation and door preparation for reversal.
Instructions for reattaching the door after reversal and final adjustments.
Instructions for ensuring the unit is properly leveled for optimal operation.
Steps for safely removing and reinstalling the unit's front grille.
How to remove and install shelves within the unit's cabinet.
Steps for removing and installing wine racks from the unit.
Instructions for removing and installing shelves located on the door.
Explains the refrigeration cycle and the compressor's role.
Crucial safety precautions and steps for measuring compressor winding resistance.
Advice on troubleshooting steps to take before contacting service.
Contact information and procedures for arranging professional service.
How to clean vinyl clad and stainless steel exterior surfaces.
Steps for cleaning the inside of the unit and its components.
Procedures for manually defrosting automatic defrost models.
Recommended interval and steps for cleaning the unit's condenser.
Guidelines for preparing the unit for extended periods of non-use.
Steps and safety considerations for disposing of the unit.
Information on available guides, specifications, and compliance documents.
Contact details for general questions, service, and parts assistance.
Company history, philosophy, and product line overview.
