12
Furthermore, every recipe has 4 categories to suit different kinds of the
selected food.
These pre-programmed categories are set up for different proteins, such as
fatty, lean, roast or thin cut. Once a food is selected the cycle can be started
immediately by pressing the specific category (left side of the screen, one out
of the 4 tabs).
10
Rev08/04/2015
2.1. Blast Chilling Manual Program
Press the tab Manual in the recipe selection screen.
To set the time, push the TIME tab and set the time of the cycle. Push the AIR
TEMPERATURE tab to set the room air temperature. Push the FAN speed tab to
set the fan speed, default is always high or 10. Push the HOLD TEMPERATURE
tab to set the temperature at the end of the cycle. Hit OK to start the cycle.
10
Rev08/04/2015
2.1. Blast Chilling Manual Program
Press the tab Manual in the recipe selection screen.
To set the time, push the TIME tab and set the time of the cycle. Push the AIR
TEMPERATURE tab to set the room air temperature. Push the FAN speed tab to
set the fan speed, default is always high or 10. Push the HOLD TEMPERATURE
tab to set the temperature at the end of the cycle. Hit OK to start the cycle.
10
Rev08/04/2015
2.1. Blast Chilling Manual Program
Press the tab Manual in the recipe selection screen.
To set the time, push the TIME tab and set the time of the cycle. Push the AIR
TEMPERATURE tab to set the room air temperature. Push the FAN speed tab to
set the fan speed, default is always high or 10. Push the HOLD TEMPERATURE
tab to set the temperature at the end of the cycle. Hit OK to start the cycle.
To Next Page
Loading...
