44
iv. The Display will show the above screen and will restart at the end of the
procedure
• Software Update (only software)
This functions allows Software enhancement related to the Power relay board
only (also called Firmware Update). To do a Firmware Update please collect the
necessary files. These files will come in a zipped folder, containing the following
files
CHILL.emi
indexemi.arg NOTE: the file index.arg changes according to the
type of Software Update (Software, only parameters, both
Software and Parameters)
Desm_BlastChiller_900_0251_11A.bin
i. Once the files are available on a PC, connect a USB drive to it
ii. Create a folder on the USB drive and name it “CHILL”
iii. Copy the file
CHILL.emi
in the “CHILL” folder
iv. Exit from the folder and copy the files
indexemi.arg
and
Desm_BlastChiller_900_0251_11A.bin
next to the “CHILL” folder
The USB content will show as in the below picture:
To Next Page
Loading...
Need help?
General
