Blast Chiller Touch Screen Manual
47
Rev08/04/2015
• Software Update (only parameters)
This function will allow loading from a USB drive the parameters settings only,
but basically requires the same procedure as in the Software Update above
described. To do a parameter update please collect the necessary files from
your Authorized Service Company. These files will come in a zipped folder,
containing the following files
CHILL.emi
indexemi.arg (NOTE: the file index.arg changes according to the
type of Software Update (Software, only parameters, both
Software and Parameters)
parA.fac
i. Once the files are available on a PC, connect a USB drive to it
ii. Create a folder on the USB drive and name it “CHILL”
iii. Copy the file
CHILL.emi
and
parA.fac
in the “CHILL” folder
iv.
Exit from the folder and copy the files
indexemi.arg
next to the “CHILL”
folder
To Next Page
Loading...
Need help?
General
