To Next PageTo Next Page
Need help?Do you have a question about the U.S. BLIND STITCH 718-1 and is the answer not in the manual?
Guides users on preparing purchase orders for parts, including examples for single and multiple machines.
Overview of general maintenance for the machine, emphasizing genuine parts and proper lubrication.
Step-by-step guide for replacing the looper, including timing adjustments and clearance checks.
Instructions for replacing the needle guide, which prevents damage to the presserfoot.
Detailed steps for replacing the shoe (cloth retainer) and its associated pin and spring.
Procedures for replacing the feeder when it fails to feed work properly, including depth adjustments.
Lists all parts and their corresponding part numbers for the main frame assembly.
Details parts associated with the main shaft, including a change notice for later serial numbers.
Lists parts for the needle drive mechanism, including specifications for needle sizes.
Lists parts related to the feed drive, with notes on different types of feed dogs.
Lists parts and assemblies for the looper drive mechanism.
Lists parts and their quantities for the Feed Frame Group I.
Lists parts and their quantities for the Feed Frame Group II.
Lists parts and their quantities for the regulating group.
Lists parts and their quantities for the front plate group.
Lists parts and their quantities for the presserfoot group.
General| Model | 718-1 |
|---|---|
| Stitch Type | Blind Stitch |
| Needle Count | 1 |
| Type | Blind Stitch |
| Brand | U.S. |
| Power Requirements | 110V |
