To Next PageTo Next PageHow to fix no spray on U.S. Products HYDRAPORT 100SC Floor Machine?
If your U.S. Products Floor Machine has no spray, start by checking if the solution tank is empty or if the filter is plugged. Also, verify the spray tip(s) aren't clogged. Ensure the pump is running and primed. Check the valve on the wand and confirm the solution hose is securely connected to both the hose and the machine.
Why is there no heat in my U.S. Products HYDRAPORT 100SC Floor Machine?
If your U.S. Products Floor Machine has no heat, first ensure that the heat is turned on and that the green circuit indicator light is illuminated. Check the wall outlet for power and reset the breaker if needed.
What to do if U.S. Products HYDRAPORT 100SC has no suction?
If your U.S. Products Floor Machine has no suction, turn off the vacuum to allow the ball in the float to drop down. Ensure the recovery tank is not full and empty it if necessary. Test the switch to ensure there is power to the motor. If problems persist, test the vacuum motor.
Why does my U.S. Products HYDRAPORT 100SC Floor Machine have low suction?
If you're experiencing low suction with your U.S. Products Floor Machine, check the cleaning tool and vacuum hose for any debris that may be causing a blockage. Make sure that the drain hose cap is completely closed. Inspect the recovery tank lid and gasket to ensure they are properly seated and undamaged.
General| Brand | U.S. Products |
|---|---|
| Model | HYDRAPORT 100SC |
| Category | Floor Machine |
| Language | English |
