Need help?Do you have a question about the uAvionix tailBeaconX TSO and is the answer not in the manual?
General| Brand | uAvionix |
|---|---|
| Model | tailBeaconX TSO |
| Category | Marine Radio |
| Language | English |
Manual provides mechanical and electrical info, not an approved manual.
Lists TSOs complied with by tailBeaconX when properly installed.
Lists system functions and their DO-178C/DO-254 DAL.
Details granted deviations and incomplete functionalities for TSO compliance.
Lists FCC IDs for the tailBeaconX TSO and its containment.
Details markings on the tailBeaconX hardware unit.
Shows markings on the universal installation kit.
Notes software identification by electronic marking.
Lists conducted tests and conditions based on DO-160G.
Discusses maintenance and operational notes for continued airworthiness.
Outlines limitations related to installation and SatCom compatibility.
Describes tailBeaconX as a complete Mode S ES ADS-B OUT transponder with integrated GPS.
Confirms Aireon compatibility for space-based ADS-B surveillance.
Explains Wi-Fi is for on-ground configuration and enabled in standby mode.
Details how to adjust the call sign using installer app or control head.
Explains how the external suppression input works with L-band equipment.
Provides detailed technical specifications for tailBeaconX.
Lists dimensions, weight, operating range, and voltage specs.
Details transmit/receive frequencies and sensitivity for Mode S.
Lists GPS/SBAS channel count, frequency, sensitivity, and accuracy.
Specifies color and intensity for the rear position light.
Details physical, rate, protocols, and suppression for wired interface.
Lists standard, security, SSID, frequency, clients, and protocol for Wi-Fi.
Shows a wiring diagram for system interfaces.
Instructions for unpacking and visually inspecting the unit for damage.
Lists part numbers for tailBeaconX hardware and installation kits.
Lists components of the universal installation kit.
Lists standard aviation parts and tools required for installation.
Details the need for a controlling device (control head) for the remote transponder.
Instructions on mounting the unit, ensuring clear sky view and avoiding obstructions.
Describes direct mounting procedures and considerations.
Steps for installing the mounting plate, including gasket and clearance.
Describes using the spacer for shallower cavities or interference issues.
Details power, ground, and RS-232 connections, including wire gauge guidance.
Instructions for electrically connecting and physically installing the unit into the mounting plate.
Guides users to download the skyBeacon Installer app for configuration.
Step-by-step instructions for connecting to the tailBeaconX Wi-Fi network.
Details essential configuration items on the "Basic" tab of the app.
Details advanced configuration items less likely to need modification.
Steps to verify configuration settings after installation using the app.
Guides on performing regulatory compliance checks using Ground Test Mode.
Instructions for confirming software version and performing annual checks.
Details the uAvionix Control Protocol – Half Duplex.
Specifies minimum data required in a control message for tailBeaconX.
Explains how transponder status and faults are reported via UCP-HD.
Describes using Apollo for control and monitoring of tailBeaconX.
Lists supported input messages for Apollo protocol.
Lists compatible protocols for tailBeaconX (UCP-HD, Apollo).
Lists compatible uAvionix and third-party equipment for control.
Lists third-party EFIS devices reported as compatible with tailBeaconX.
Provides example pinout options for connecting to third-party EFIS displays.
To Next Page